Vmware
|
Question: 1
|
Which workflow should the administrator follow to create
a High Availability (HA) cluster?
A. Select a datacenter, create a cluster in the
datacenter, add resources to the cluster, enable HA, and configure HA-specific
settings
B. Select a resource pool, create an HA Cluster in the
resource pool, add resources to the cluster, configure HA-specific settings,
and enable HA
C. Select a datacenter, create an HA Cluster, add
resources to the cluster, configure HAspecific settings, and enable HA
D. Select a resource pool, create a cluster in the pool,
add resources to the cluster, enable HA, and configure HA-specific
settings
|
Answer: A
|
|
Question: 2
|
What should an administrator do to configure
multi-pathing using software iSCSI?
A. Bind the VMkernel ports to the software iSCSI
initiator
B. Configure Zoning between the hosts and SAN switches
C. Configure NIC teaming on the associated uplinks
D. Ensure jumbo frames are enabled end-to-end
|
Answer: A
|
|
Question: 3
|
A vSphere administrator needs to upgrade a single extent
VMFS3 datastore to VMFS5 and expand it to 4TB in size. The storage
administrator has already expanded the underlying LUN to 4TB. Which steps
should the vSphere administrator take?
A. Expand the VMFS3 datastore to 4TB and then upgrade to
VMFS5
B. Upgrade the datastore to VMFS5, manually change the
partition scheme to GPT, and then expand the datastore to 4TB
C. Upgrade the datastore to VMFS5 and then expand it to
4TB
D. Change the block size of the VMFS3 datastore to 1MB,
upgrade the datastore to VMFS5, and expand it to 4TB
|
Answer: C
|
|
Question: 4
|
Which VLAN configuration requires the a switch port to be
configured as an access port?
A. Private VLAN
B. External Switch Tagging
C. Virtual Guest Tagging
D. Virtual Switch Tagging
|
Answer: B
|
|
Question: 5
|
During a physical network reconfiguration, an ESXi host
briefly lost connection to the management network. High Availability (HA) began
powering off the virtual machines residing on the affected host to be restarted
on an unaffected host in the cluster. Which setting should the administrator
configure to prevent this type of HA failover during planned maintenance?
A. Host isolation response
B. Host monitoring
C. VM monitoring
D. Admission control
|
Answer: B
|
|
Question: 6
|
What are two features provided by VMFS5? (Choose
two.)
A. Support for greater than 2TB storage devices for only
VMFS and Physical RDMs
B. Support for up to 32 extents
C. Support for greater than 2TB storage devices for VMFS,
Physical and Virtual RDMs
D. Support for up to 64 extents
|
Answer: B,C
|
|
Question: 7
|
During the installation of ESXi, a vmkernel interface can
be configured with what capabilities? A.
Management traffic B. Management traffic and vMotion C. Management traffic,
vMotion, and Fault Tolerance logging D. Management traffic, vMotion, Fault
Tolerance logging, and IP storage
|
Answer: A
|
|
Question: 8
|
During an upgrade, the ESXi 5.x installer finds an
existing version of ESXi and a VMFS3 volume. No virtual machines exist on the
host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option
should be chosen to meet this requirement?
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade ESXi and overwrite the VMFS datastore
|
Answer: C
|
|
Question: 9
|
An administrator attempts to install vCenter Single
Sign-On Server. The installer returns an error message indicating that the
installation failed. Prior to the installation, all setup prerequisites were
met. The administrator has generated a vCenter Server Single Sign-On support
bundle. Which two files should the administrator analyze to determine the cause
of the failure? (Choose two.)
A. <SSO_Server_Directory>\utils\logs\imsTrace.log
B. <SSO_Server_Directory>\utils\logs\install.txt
C. %TEMP%\utils\logs\vminst.log
D. %TEMP%\vminst.log
|
Answer: A,D
|
|
Question: 10
|
Which two services can be enabled on VMkernel adapters
for an ESXi 5.5 host through the vSphe re Web Client? (Choose two.)
A. Fault Tolerance Traffic
B. Virtual SAN Traffic
C. iSCSI Traffic
D. Virtual Machine Traffic
|
Answer: A,B
|
|
Question: 11
|
A virtual machine is receiving a large number of network
packets, which is affecting the performance of other virtual machines connected
to the same virtual network. What should the vSphere administrator do to
resolve the issue?
A. Migrate the virtual machine to a standard switch that
has been configured for ingress traffic shaping B. Configure the distributed
switch to which the virtual machine is connected for ingress traffic shaping C.
Migrate the virtual machine to a different port group on the same distributed
switch
D. Enable Network I/O Control on the standard switch to
which the virtual machine is connected
|
Answer: B
|
|
Question: 12
|
An administrator is unable to login to vCenter Server
when using the vSphere Web Client. The administrator successfully accessed
vCenter Server using the client earlier the same day. What is the most
appropriate first step the administrator should take to resolve this
issue?
A. Verify the web browser being used has Adobe Flash
plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running
on the vCenter Server
C. Verify the vSphere Web Server service is running on
the vCenter Server
D. Verify the administrator has permissions configured in
vCenter Server
|
Answer: B
|
|
Question: 13
|
Which two statements are true regarding a new vSphere
deployment that is using software FCoE boot from SAN? (Choose two.)
A. Multi-pathing options must be configured by the
vmkernel after boot.
B. The adapter must support iBFT or UEFI.
C. The adapter must support FBFT or FBPT.
D. Multi-pathing options must be configured in the Boot
ROM.
|
Answer: A,C
|
|
Question: 14
|
A customer needs to create a virtual machine that can be
migrated across multiple vSphere clusters. The virtual machine has an
application that must detect the physical characteristics of the storage
device. Which type of virtual disk can be added to the virtual machine to meet
these requirements?
A. A virtual disk on a VMFS datastore
B. A raw device mapped disk in virtual compatibility mode
C. A raw device mapped disk in physical compatibility
mode
D. A virtual disk on an NFS datastore
|
Answer: C
|
|
Question: 15
|
Exhibit –
-- Exhibit -- The
WinXP virtual machine user reports intermittent connectivity to the corporate
network. The exhibit shows the current configuration. The configuration is as
follows: This virtual machine runs in a DRS/HA cluster of two hosts. The
VCP_DCV_Example vSphere Distributed Switch was recently created.
The WinXP virtual machine was recently migrated from
another vSphere Distributed Switch. The WinXP virtual machine was able to
connect prior to migration to this switch. No changes to the VCP_DCV_Example
switch have been made since creation. Which step should the administrator take
to resolve the WinXP virtual machine's intermittent connectivity to the
corporate network?
A. Add the ESXi host to the switch where the virtual
machine is currently running
B. Disable Port Blocking on the VCP_DCV_Example switch
C. Disable Port Blocking on the Production port group
D. Enable Network I/O Control on the switch to better
balance I/O
|
Answer: A
|
No comments:
Post a Comment