VCPC550 Certification Test

Vmware

Exam4prep

VCPC550

Question: 1

Which workflow should the administrator follow to create a High Availability (HA) cluster? 

A. Select a datacenter, create a cluster in the datacenter, add resources to the cluster, enable HA, and configure HA-specific settings

B. Select a resource pool, create an HA Cluster in the resource pool, add resources to the cluster, configure HA-specific settings, and enable HA

C. Select a datacenter, create an HA Cluster, add resources to the cluster, configure HAspecific settings, and enable HA

D. Select a resource pool, create a cluster in the pool, add resources to the cluster, enable HA, and configure HA-specific settings 

Answer: A

Question: 2

What should an administrator do to configure multi-pathing using software iSCSI? 

A. Bind the VMkernel ports to the software iSCSI initiator

B. Configure Zoning between the hosts and SAN switches

C. Configure NIC teaming on the associated uplinks

D. Ensure jumbo frames are enabled end-to-end 

Answer: A

Question: 3

A vSphere administrator needs to upgrade a single extent VMFS3 datastore to VMFS5 and expand it to 4TB in size. The storage administrator has already expanded the underlying LUN to 4TB. Which steps should the vSphere administrator take? 

A. Expand the VMFS3 datastore to 4TB and then upgrade to VMFS5

B. Upgrade the datastore to VMFS5, manually change the partition scheme to GPT, and then expand the datastore to 4TB

C. Upgrade the datastore to VMFS5 and then expand it to 4TB

D. Change the block size of the VMFS3 datastore to 1MB, upgrade the datastore to VMFS5, and expand it to 4TB 

Answer: C

Question: 4

Which VLAN configuration requires the a switch port to be configured as an access port? 

A. Private VLAN

B. External Switch Tagging

C. Virtual Guest Tagging

D. Virtual Switch Tagging 

Answer: B

Question: 5

During a physical network reconfiguration, an ESXi host briefly lost connection to the management network. High Availability (HA) began powering off the virtual machines residing on the affected host to be restarted on an unaffected host in the cluster. Which setting should the administrator configure to prevent this type of HA failover during planned maintenance? 

A. Host isolation response

B. Host monitoring

C. VM monitoring

D. Admission control 

Answer: B

Question: 6

What are two features provided by VMFS5? (Choose two.) 

A. Support for greater than 2TB storage devices for only VMFS and Physical RDMs

B. Support for up to 32 extents

C. Support for greater than 2TB storage devices for VMFS, Physical and Virtual RDMs

D. Support for up to 64 extents 

Answer: B,C

Question: 7

During the installation of ESXi, a vmkernel interface can be configured with what capabilities?  A. Management traffic B. Management traffic and vMotion C. Management traffic, vMotion, and Fault Tolerance logging D. Management traffic, vMotion, Fault Tolerance logging, and IP storage 

Answer: A

Question: 8

During an upgrade, the ESXi 5.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement? 

A. Upgrade ESXi and preserve the VMFS datastore

B. Install ESXi and preserve the VMFS datastore

C. Install ESXi and overwrite the VMFS datastore

D. Upgrade ESXi and overwrite the VMFS datastore 

Answer: C

Question: 9

An administrator attempts to install vCenter Single Sign-On Server. The installer returns an error message indicating that the installation failed. Prior to the installation, all setup prerequisites were met. The administrator has generated a vCenter Server Single Sign-On support bundle. Which two files should the administrator analyze to determine the cause of the failure? (Choose two.) 

A. <SSO_Server_Directory>\utils\logs\imsTrace.log

B. <SSO_Server_Directory>\utils\logs\install.txt

C. %TEMP%\utils\logs\vminst.log

D. %TEMP%\vminst.log 

Answer: A,D

Question: 10

Which two services can be enabled on VMkernel adapters for an ESXi 5.5 host through the vSphe re Web Client? (Choose two.) 

A. Fault Tolerance Traffic

B. Virtual SAN Traffic

C. iSCSI Traffic

D. Virtual Machine Traffic 

Answer: A,B

Question: 11

A virtual machine is receiving a large number of network packets, which is affecting the performance of other virtual machines connected to the same virtual network. What should the vSphere administrator do to resolve the issue? 

A. Migrate the virtual machine to a standard switch that has been configured for ingress traffic shaping B. Configure the distributed switch to which the virtual machine is connected for ingress traffic shaping C. Migrate the virtual machine to a different port group on the same distributed switch

D. Enable Network I/O Control on the standard switch to which the virtual machine is connected 

Answer: B

Question: 12

An administrator is unable to login to vCenter Server when using the vSphere Web Client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? 

A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later

B. Verify the vCenter Single Sign-On service is running on the vCenter Server

C. Verify the vSphere Web Server service is running on the vCenter Server

D. Verify the administrator has permissions configured in vCenter Server 

Answer: B

Question: 13

Which two statements are true regarding a new vSphere deployment that is using software FCoE boot from SAN? (Choose two.) 

A. Multi-pathing options must be configured by the vmkernel after boot.

B. The adapter must support iBFT or UEFI.

C. The adapter must support FBFT or FBPT.

D. Multi-pathing options must be configured in the Boot ROM. 

Answer: A,C

Question: 14

A customer needs to create a virtual machine that can be migrated across multiple vSphere clusters. The virtual machine has an application that must detect the physical characteristics of the storage device. Which type of virtual disk can be added to the virtual machine to meet these requirements? 

A. A virtual disk on a VMFS datastore

B. A raw device mapped disk in virtual compatibility mode

C. A raw device mapped disk in physical compatibility mode

D. A virtual disk on an NFS datastore 

Answer: C

Question: 15

Exhibit –

 -- Exhibit -- The WinXP virtual machine user reports intermittent connectivity to the corporate network. The exhibit shows the current configuration. The configuration is as follows: This virtual machine runs in a DRS/HA cluster of two hosts. The VCP_DCV_Example vSphere Distributed Switch was recently created.  

The WinXP virtual machine was recently migrated from another vSphere Distributed Switch. The WinXP virtual machine was able to connect prior to migration to this switch. No changes to the VCP_DCV_Example switch have been made since creation. Which step should the administrator take to resolve the WinXP virtual machine's intermittent connectivity to the corporate network? 

A. Add the ESXi host to the switch where the virtual machine is currently running

B. Disable Port Blocking on the VCP_DCV_Example switch

C. Disable Port Blocking on the Production port group

D. Enable Network I/O Control on the switch to better balance I/O 

Answer: A

VCP550 Free Exam Download

VMware

Exam4prep

VCP550

Question: 1

An administrator is planning a vSphere infrastructure with the following specific networking requirements: • The ability to shape inbound (RX) traffic • Support for Private VLANs (PVLANs) • Support for LLDP (Link Layer Discovery Protocol) What is the minimum vSphere Edition that will support these requirements? 

A. vSphere Essentials Plus

B. vSphere Standard

C. vSphere Enterprise

D. vSphere Enterprise Plus 

Answer: D

Question: 2

What two IT infrastructure components are virtualized by vSphere Essentials? (Choose two.) 

A. Networks

B. Applications

C. Storage

D. Management 

Answer: A,C

Question: 3

An administrator attempts to install vCenter Single Sign-On Server. The installer returns an error message indicating that the installation failed. Prior to the installation, all setup prerequisites were met. The administrator has generated a vCenter Server Single Sign-On support bundle. Which two files should the administrator analyze to determine the cause of the failure? (Choose two.) 

A. Server\utils\logs\imsTrace.log

B. Server\utils\logs\install.txt

C. %TEMP%\utils\logs\vminst.log

D. %TEMP%\vminst.log 

Answer: A,D

Question: 4

Which Single Sign-On deployment mode should an administrator use for two 5.x vCenter Servers configured with linked mode? 

A. Basic Single Sign-On with vCenter Server Heartbeat

B. Multisite Single Sign-On

C. Basic Single Sign-On

D. Single Sign-On with Linked Mode 

Answer: B

Question: 5

    -- Exhibit –

 -- Exhibit -- Which two statements below could explain why the vSphere Client is reporting N/A for hyperthreading? (Choose two.) The physical CPUs in the host do not support hyperthreading. 

A. Hyperthreading is disabled in the host's BIOS.

B. The physical CPUs in the host are not multi-core.

C. The number of CPUs meets or exceeds the maximum without hyperthreading. 

Answer: A,B

Question: 6

Immediately after installing an ESXi host, an administrator needs to examine the following log files: •

/var/log/hostd.log • /var/log/vmkernel.log

• /var/log/vpxa.log Which two connections would allow an administrator to examine these files? (Choose two.) 

A. Connecting to the Direct Console User Interface

B. Attaching a vSphere Client directly to the ESXi host

C. Attaching the vSphere Web Client directly to the ESXi host

D. Attaching the vSphere Client to the vCenter Server managing the ESXi host 

Answer: A,B

Question: 7

An administrator is upgrading a vSphere Distributed Switch. The existing switch is version 5.0 and the administrator wants to upgrade to the latest version possible. The environment contains several ESXi 5.1 hosts. Which two options are available to ensure that the upgraded switch will be compatible with these hosts? (Choose two.) 

A. Upgrade the vSphere Distributed Switch to 5.5

B. Upgrade the ESXi 5.1 hosts to version 5.5, then upgrade the vSphere Distributed Switch to 5.5

C. Upgrade the vSphere Distributed Switch to 5.1

D. Upgrade the ESXi host switches to 5.5, then upgrade the vSphere Distributed Switch to 5.5 

Answer: B,C

Question: 8

To avoid unnecessary planned downtime, what is the minimum version of VMware Tools that, if installed, will decrease the need for virtual machine reboots following VMware Tools upgrades? 

A. 5.5

B. 5.1

C. 5.0

D. 4.1 

Answer: B

Question: 9

Which two Identity Sources are available to add for vCenter Single Sign-On authentication? (Choose two.) 

A. LocalOS

B. OpenLDAP

C. NIS as an LDAP Server

D. VCMSDS 

Answer: A,B

Question: 10

Which VLAN configuration requires switch connectivity defined as an access port? 

A. Private VLAN

B. External Switch Tagging

C. Virtual Guest Tagging

D. Virtual Switch Tagging 

Answer: B

C2040-958 Download Free Pdf

IBM

Exam4prep

C2040-958

Question: 1

What is the purpose of the preconfiguration test tool? 

A. To enable the Hybrid Account for mail routing.

B. To preconfigure network communication between the on-premises environment and IBM SmartCloud Notes.

C. To enable the Hybrid Account for replication and freetime lookup.

D. To determine if the network and servers in the on-premises environment are set up correctly for replication, mail routing, and freetime lookup. 

Answer: D

Question: 2

When setting up an on-premises environment, which statement is true about the passthru server? 

A. The passthru server handles the transfer of network packets and performs mail-routing and replication with IBM SmartCloud Notes servers.

B. The passthru server is outside the corporate DMZ.

C. The server ID for the passthru server must be registered with a unique OU-level certifier, separate from the OU-level certifier that is used to register the hub/mail server.

D. The passthru server handles inbound connections from the SmartCloud Notes directory sync and mail hub servers. 

Answer: D

Question: 3

What is required to route mail from external internet domains to users in the customer SMTP domain who are hosted in the IBM SmartCloud Notes service? 

A. A company-controlled SMTP host server configured to accept mail for the internet domain of the users in the service

B. An SMTP server in the service configured to accept mail for the internet domain of the users in the service.

C. Either an SMTP host server in the service configured to accept mail for the internet domain of the users in the service or a company-controlled SMTP host server configured to accept mail for the internet domain of the users in the service and domain verification has been completed for the internet domain.

D. An SMTP host server in the service configured to accept mail for the internet domain of the users in the service and a company-controlled SMTP host server configured to accept mail for the internet domain of the users in the service. 

Answer: C

Question: 4

Conway's customer has two production IBM Lotus Domino domains. The first domain, Renovations, has users both on-premises and in the service. The second domain, PowerRenov, only has users on-premises. To route mail from PowerRenov users to Renovations users in the service .... 

A. PowerRenov routes mail through Renovations.

B. a passthru server is required for each domain: Renovations and PowerRenov.

C. four mail hub servers are required: two in each on-premises Lotus Domino domain.

D. required Connection documents are automatically created by the Domain Configuration tool. 

Answer: A

Question: 5

How does directory synchronization occur between the on-premises replication hub and the IBM SmartCloud Notes directory sync server? 

A. Directory synchronization occurs each time the Domain Configuration tool runs.

B. Directory synchronization occurs when the SmartCloud Notes directory sync server connects directly to the on-premises replication hub.

C. Directory synchronization occurs when the company administrator initiates replication with the SmartCloud Notes directory sync server from the on-premises replication hub console.

D. Directory synchronization occurs when the SmartCloud Notes directory sync server connects to the on-premises replication hub via a passthru server. 

Answer: D

Question: 6

The IBM Lotus Domino server being used for passthru at XYZ Corp is version 8.0. Although this seems to work fine in the IBM SmartCloud Notes hybrid model, why should XYZ Corp consider upgrading to at least version 8.5.2? 

A. The passthru server would use less hardware resources.

B. The passthru server would be easier to manage and maintain.

C. The passthru server would support more connections.

D. The passthru session connection time would be reduced, enabling faster initiation of passthru connections. 

Answer: D

Question: 7

How do users who access IBM SmartCloud Notes using a browser receive credentials needed for logging into SmartCloud Notes the first time? 

A. Users receive a registration URL in an email sent by the SmartCloud team to the user's existing mail account, then users are able to register their own credentials.

B. Users log into SmartCloud Notes using their IBM Lotus Notes client. Then, they open the Welcome letter from the SmartCloud Notes team, which provides the needed credentials for SmartCloud Notes.

C. Users access the URL for SmartCloud Notes from a browser, log in with the temporary login name and password provided by the company administrator, then users can update their own login name and password.

D. Users access the URL for SmartCloud Notes from a browser, log in with the login name and temporary password provided by the company administrator, then users must update their password on first login. 

Answer: D

Question: 8

Once the hybrid account configuration is operational and a second directory server is to be added, which of the following is true? 

A. The customer administrator updates the IBM SmartCloud Notes administrator account settings with the name of the server.

B. The customer administrator updates the SmartCloud Notes administrator account settings with the name of the server and reruns the Domain Configuration Tool that was downloaded when the initial account was configured.

C. The customer administrator updates the SmartCloud Notes administrator account settings with the name of the server, downloads and runs the Domain Configuration Tool.

D. The customer administrator updates the SmartCloud Notes administrator account settings with the name of the server and calls IBM Support to confirm the update has been completed. 

Answer: C

Question: 9

What does running the Domain Configuration tool require? 

A. The computer running the tool is inside the customer network infrastructure.

B. The computer running the tool is inside the customer network infrastructure and the IBM Lotus Notes ID has write access to the on-premises IBM Lotus Domino Directory.

C. The computer running the tool is inside the customer network infrastructure and the Lotus Notes ID has write access to both the on-premises Lotus Domino directory and the passthru server's Lotus Domino directory.

D. The computer running the tool is inside the customer network infrastructure or has a valid VPN connection to it. 

Answer: C

Question: 10

During IBM SmartCloud Notes account set up, a company's internet domain verification is ______ 

A. optional, but recommended and can be performed as soon as the Domain Configuration tool has been run.

B. required, and can be performed as soon as the Domain Configuration tool has been run.

C. required, and can be performed after the Domain Configuration tool has been run and the on-premises IBM Lotus Domino Directories have synchronized with the service.

D. Required, and can be performed after the on-premises Lotus Domino Directories have synchronized with the service provided that a Global Domain document exists in at least one on-premises Lotus Domino Directory. 

Answer: D

500-007 Certification Study Guide

Cisco

Exam4prep

500-007

Question: 1

You have configured your Cisco TelePresence Codec C90 but discover unwanted noise during use. What best practice will help avoid this problem? 

A. Connect only one device at a time to an input and avoid daisy-chaining.

B. Recycle the power on your system after adding each additional input.

C. If you are not using an input, turn it off.

D. Daisy-chain additional devices using a serial cable to provide separate power supplies. 

Answer: C

Question: 2

Refer to the exhibit.

 Which two letters represent input connections on the Cisco TelePresence Codec C90? (Choose two.) 

A. A

B. B

C. C

D. D  

Answer: A,D

Question: 3

You want to reconfigure the H.323 and SIP settings using the remote control on the Cisco TelePresence Codec C90. Which menu allows you to do this? 

A. Audio input levels

B. IP settings

C. Advanced configuration

D. Protocol configuration 

Answer: C

Question: 4

What do you need to do before an endpoint can place or receive H.323 calls using a URI address? 

A. Register the endpoint to the SIP server.

B. Register the endpoints to the gatekeeper.

C. Register the endpoint to the gateway.

D. Register the endpoint to the Cisco TelePresence MCU. 

Answer: B

Question: 5

Refer to the exhibit.

 You are installing a high-definition (720p or 1080p) monitor on the Cisco TelePresence Codec C90. Which of the outputs that are represented by letters in the exhibit should you use?

A. A or B

B. A or D

C. A or E

D. B or C

E. D or E 

Answer: D

Question: 6

While on a call, using the remote control, how do you add an additional participant to a call on your MultiSite-enabled endpoint? 

A. Press the Home button to return to the menu, and select the Add Participant button.

B. Press and hold the End Call key to bring up the dialing menu.

C. Press and hold the Call key to bring up the dialing menu.

D. Press the Call key, and choose or dial the number of the additional participant. 

Answer: D